GVRP and Bridge Extension Commands
4-203
4
Command Mode
Privileged Exec
Command Usage
See “Displaying Basic VLAN Information” on page 3-138 and “Displaying
Bridge Extension Capabilities” on page 3-15 for a description of the displayed
items.
Example
switchport gvrp
This command enables GVRP for a port. Use the no form to disable it.
Syntax
[no] switchport gvrp
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
show gvrp configuration
This command shows if GVRP is enabled.
Syntax
show gvrp configuration [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-25/49)
• port-channel channel-id (Range: 1-32)
Console#show bridge-ext
Max support VLAN numbers: 256
Max support VLAN ID: 4093
Extended multicast filtering services: No
Static entry individual port: Yes
VLAN learning: IVL
Configurable PVID tagging: Yes
Local VLAN capable: No
Traffic classes: Enabled
Global GVRP status: Disabled
GMRP: Disabled
Console#
Console(config)#interface ethernet 1/1
Console(config-if)#switchport gvrp
Console(config-if)#
To Next Page
Loading...
