EasyManuals Logo
Home>Edge-Core>Network Router>ES4625

Edge-Core ES4625 User Manual

Edge-Core ES4625
674 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
2-1
Chapter 2: Initial Configuration
Connecting to the Switch
Configuration Options
The switch includes a built-in network management agent. The agent offers a variety
of management options, including SNMP, RMON and a web-based interface. A PC
may also be connected directly to the switch for configuration and monitoring via a
command line interface (CLI).
Note: The IP address for this switch is obtained via DHCP by default. To change this
address, see “Setting an IP Address” on page 2-7.
The switch’s HTTP web agent allows you to configure switch parameters, monitor
port connections, and display statistics using a standard web browser such as
Netscape Navigator version 6.2 and higher or Microsoft IE version 5.0 and higher.
The switch’s web management interface can be accessed from any computer
attached to the network.
The CLI program can be accessed by a direct connection to the RS-232 serial
console port on the switch, or remotely by a Telnet connection over the network.
The switch’s management agent also supports SNMP (Simple Network
Management Protocol). This SNMP agent permits the switch to be managed from
any system in the network using network management software such as
HP OpenView.
The switch’s web interface, CLI configuration program, and SNMP agent allow you
to perform the following management functions:
Set user names and passwords
Set an IP interface for any VLAN
Configure SNMP parameters
Enable/disable any port
Set the speed/duplex mode for any port
Configure the bandwidth of any port by limiting input or output rates
Control port access through IEEE 802.1X security or static address filtering
Filter packets using Access Control Lists (ACLs)
Configure up to 255 IEEE 802.1Q VLANs
Enable GVRP automatic VLAN registration
Configure IP routing for unicast or multicast traffic
Configure router redundancy
Configure IGMP multicast filtering
Upload and download system firmware via TFTP
Upload and download switch configuration files via TFTP

Table of Contents

Other manuals for Edge-Core ES4625

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edge-Core ES4625 and is the answer not in the manual?

Edge-Core ES4625 Specifications

General IconGeneral
BrandEdge-Core
ModelES4625
CategoryNetwork Router
LanguageEnglish

Related product manuals