Configuring the Switch
3-14
3
• Operation Code Version – Version number of runtime code.
• Role – Shows that this switch is operating as Master or Slave.
These additional parameters are displayed for the CLI.
• Unit ID – Unit number in stack.
• Redundant Power Status – Displays the status of the redundant power supply.
Web – Click System, Switch Information.
Figure 3-4 Switch Information
CLI – Use the following command to display version information.
Console#show version 4-62
Unit 1
Serial number: A422000632
Hardware version: R01
EPLD version: 15.15
Number of ports: 48
Main power status: up
Redundant power status: not present
Agent (master)
Unit ID: 1
Loader Version: 1.0.1.3
Boot ROM Version: 1.0.1.4
Operation Code Version: 3.1.1.21
Console#
To Next Page
Loading...
Need help?
General
