Edge-Core ES4625 - Show Radius-Server; Table 4-30 TACACS+ Client Commands; TACACS+ Client

Authentication Commands
4-75
4
show radius-server
This command displays the current settings for the RADIUS server.
Default Setting
None
Command Mode
Privileged Exec
Example
TACACS+ Client
Terminal Access Controller Access Control System (TACACS+) is a logon
authentication protocol that uses software running on a central server to control
access to TACACS-aware devices on the network. An authentication server
contains a database of multiple user name/password pairs with associated privilege
levels for each user or group that require management access to a switch.
Console#show radius-server
Remote RADIUS server configuration:
Global settings:
Communication key with RADIUS server: *****
Server port number: 1812
Retransmit times: 2
Request timeout: 5
Server 1:
Server IP address: 192.168.1.1
Communication key with RADIUS server: *****
Server port number: 1812
Retransmit times: 2
Request timeout: 5
Console#
Table 4-30 TACACS+ Client Commands
Command Function Mode Page
tacacs-server host Specifies the TACACS+ server GC 4-76
tacacs-server port Specifies the TACACS+ server network port GC 4-76
tacacs-server key Sets the TACACS+ encryption key GC 4-77
show tacacs-server Shows the current TACACS+ settings GC 4-77