DICOM 10-9
DICOM service setting for Worklist is described as follows:
Name Description
Device
After you set the server (s) in DICOM Server Setting screen, the
name (s) will appear in the drop-down list, select the name of the
Worklist server.
Service Name Default is xxx-Worklist, and it can be modified.
AE Title
Application Entity title, Here, it should be consistent with that of
the Worklist server.
Port
DICOM communication port, 104 by default. Here, the port should
be consistent with that of the Worklist server port.
Maximum Retries Reserved feature.
Interval Time(s) Reserved feature.
Timeout
Refers to time after which the system will stop trying to establish
a connection to the service. Value: 5ˉ60s, in increments of 5s,
and 15 by default.
[Add] Click to add the Worklist service to the service list.
[Cancel] Click to cancel the parameter setting.
[Update]
Select an item in the service list, change the parameters in the
above area, and click [Update] to update the item in the service
list.
[Delete] Click to delete the selected service in the service list.
[Default]
Select an item in the service list, click [Default] and you can see
!Y" in the Default column.
To Next Page
Loading...
Need help?
General
