Cerabar M PMC51, PMP51, PMP55
108 Endress+Hauser
Ordering information: Product Configurator, "Output, Operation" ordering feature
Function Operation via display
Analog electronic HART PROFIBUS PA FOUNDATION Fieldbus
Position adjustment (zero point correction) ―
Setting lower range value and upper range value - reference pressure present
at the device
―
Device reset ―
Locking and unlocking parameters relevant to the measured value ―
Value acceptance indicated by the green LED ― ― ― ―
Switching damping on and off ―
Local display (optional) for devices with analog electronics
A 4-line liquid crystal display (LCD) is used. The local display shows measured values, fault messages
and notice messages. The liquid crystal display of the device can be turned in 90° stages. Depending
on the orientation of the device, this makes it easy to operate the device and read the measured
values.
Functions:
• 8-digit measured value display including sign and decimal point, bar graph for 4 to 20 mA as
current display.
• Diagnostic functions (fault and warning message etc.)
Overview
A0023993
1 Bar graph
2 Symbol
3 Parameter name
Ordering information: Product Configurator, "Display, operation" ordering feature
Operating keys and elements located inside on the electronic insert
Function Operation with operating keys and elements on the electronic insert
Analog electronics HART PROFIBUS PA FOUNDATION Fieldbus
Position adjustment (zero point correction)
Setting lower range value and upper range value - reference pressure
present at the device
― ―
Device reset
Locking and unlocking parameters relevant to the measured value ―
Value acceptance indicated by the green LED
Switching damping on and off
Ordering information:
To Next Page
Loading...
