Endress+Hauser Cerabar M PMC51 - Page 85

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 85
APV-RJT nozzles with coupling nut
f
h
G
D
m
d
M
A0021674
D Diameter
f Nozzle height
G Thread
h/m Height
d
M
Max. diameter of the process isolating diaphragm
Engineering unit mm (in)
Material
1)
Nominal diameter Nominal pressure D f G m h d
M
Weight Option
2)
[in] [bar] [mm] [mm] [mm] [mm] [mm] [kg (lb)]
AISI 316L
1 PN 40 77 6.5 1 13/16 – 1/8" 22 42.6 21 0.45 (0.99) T0J
1 ½ PN 40 72 6.4 2 5/16 – 1/8" 22 42.6 28 0.75 (1.65) T1J
2 PN 40 86 6.4 2 7/8 – 1/8" 22 42.6 38 1.2 (2.65) T2J
1) Surface roughness of the surfaces in contact with the medium R
a
< 0.76 µm (29.9 µin) as standard.
2) Product Configurator, order code for "Process connection"
APV-ISS nozzles with coupling nut
G
D
d
M
4 (0.16)
50 (1.97)
30 (1.18)
SW/AF
A0021677
D Diameter
G Thread
AF Across flats
d
M
Max. diameter of the process isolating diaphragm
Engineering unit mm (in)
Material
1)
Nominal diameter Nominal pressure D G SW/AF d
M
Weight Option
2)
[in] [bar] [mm] [mm] [kg (lb)]
AISI 316L
1 PN 40 54.1 1 ½" – 1/8" 46.8 24 0.4 (0.88) T3J
1 ½ PN 40 72 2" – 1/8" 62 34 0.6 (1.32) T4J
2 PN 40 89 2 ½" – 1/8" 77 45 1.1 (2.43) T5J
1) Surface roughness of the surfaces in contact with the medium R
a
< 0.76 µm (29.9 µin) as standard.
2) Product Configurator, order code for "Process connection"