Endress+Hauser Cerabar M PMC51 - Page 87

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 87
Material
1)
Collar flange Diaphragm seal Approval Option
2)
Nominal diameter Nominal pressure K d D d
M
Weight
[in] [bar] [mm] [mm] [mm] [mm] [kg (lb)]
AISI 316L
DN 32 PN 16 59 47.7 76 25 1.5 (3.31) EHEDG, 3A, ASME-BPE NFJ
DN 40 65 53.7 82 35 1.7 (3.75) EHEDG, 3A, ASME-BPE NXJ
DN 50 77 65.7 94 45 2.2 (4.85) EHEDG, 3A, ASME-BPE NZJ
1) Surface roughness of the surfaces in contact with the medium R
a
< 0.76 µm (29.9 µin) as standard.
2) Product Configurator, order code for "Process connection"
Taper adapter with slotted-nut, DIN 11851
40 (1.57)
D
G
d
M
f
m
A0021678
D Diameter
f Adapter height
G Thread
m Height
d
M
Max. diameter of the process isolating diaphragm
Engineering unit mm (in)
Material
1)
Taper adapter Slotted-nut Diaphragm seal Approval Option
2)
Nominal
diameter
Nominal
pressure
D f G m d
M
Weight
PN Standard With TempC
Membrane
[in] [bar] [mm] [mm] [mm] [mm] [mm] [kg (lb)]
AISI 316L
DN 32 PN 40 50 10 Rd 58 x
1/6"
21 32 28 0.45 (0.99) EHEDG, 3A,
ASME-BPE
MIJ
3)
DN 40 PN 40 56 10 Rd 65 x
1/6"
21 38 36 0.45 (0.99) EHEDG, 3A,
ASME-BPE
MZJ
3)
DN 50 PN 25 68.5 11 Rd 78 x
1/6"
19 52 48 1.1 (2.43) EHEDG, 3A,
ASME-BPE
MRJ
3)
DN 65 PN 25 86 12 Rd 95 x
1/6"
21 66 61 2.0 (4.41) EHEDG, 3A,
ASME-BPE
MSJ
3)
DN 80 PN 25 100 12 Rd 110 x
1/4"
26 81 61 2.55 (5.62) EHEDG, 3A,
ASME-BPE
MTJ
3)
1) Surface roughness of the surfaces in contact with the medium R
a
< 0.76 µm (29.9 µin) as standard.
2) Product Configurator, order code for "Process connection"
3) Alternatively available with TempC Membrane.