Endress+Hauser Proline Promass 83 - Function Group FLOW COEFFICIENT

9 Block BASIC FUNCTION Device Functions Proline Promass 83 MODBUS RS485
120 Endress+Hauser
9.4.2 Function group FLOW COEFFICIENT
BASIC FUNCTION G → MODBUS RS485 GDA
→
PROCESS PARAMETER GIA
→
SYSTEM PARAMETER GLA
→
SENSOR DATA GNA → CONFIGURATION 680
→
FLOW COEFFICIENT 684
Function description
BASIC FUNCTION → SENSOR DATA → FLOW COEFFICIENT
All flow coefficients are set at the factory. All the sensor's parameter settings are saved on the S-DAT memory chip.
Contact the Endress+Hauser service organization if you have any questions about these functions.
TEMPERATURE
COEFFICIENT KM
MODBUS register:
Data type:
Access:
6840
7519
Float
read
This function shows the temperature coefficient KM.
TEMPERATURE
COEFFICIENT KM2
MODBUS register:
Data type:
Access:
6841
7521
Float
read
This function shows the temperature coefficient KM2.
TEMPERATURE
COEFFICIENT KT
MODBUS register:
Data type:
Access:
6842
7523
Float
read
This function shows the temperature coefficient KT.
CALIBRATION
COEFFICIENT KD 1
MODBUS register:
Data type:
Access:
6843
7515
Float
read
This function shows the calibration coefficient KD 1.
CALIBRATION
COEFFICIENT KD 2
MODBUS register:
Data type:
Access:
6844
7517
Float
read
This function shows the calibration coefficient KD 2.