Device Functions Proline Promass 83 MODBUS RS485 5 Block USER INTERFACE
Endress+Hauser 37
5.2 Group MAIN LINE
5.2.1 Function group CONFIGURATION
USER INTERFACE C → CONTROL CAA
→
MAIN LINE CCA → CONFIGURATION 220
Function description
USER INTERFACE → CONTROL → CONFIGURATION
ASSIGN
MODBUS register:
Data type:
Access:
2200
2514
Integer
read/write
For assigning a value to be displayed to the main line (top line in the local display).
This value is displayed during normal operation.
Options: (standard)
0 = OFF
1 = MASS FLOW
2 = MASS FLOW IN %
3 = VOLUME FLOW
4 = VOLUME FLOW IN %
5 = CORRECTED VOLUME FLOW
6 = CORRECTED VOLUME FLOW IN %
7 = DENSITY
8 = REFERENCE DENSITY
9 = TEMPERATURE
15 = ACTUAL CURRENT
18 = ACTUAL FREQUENCY
20 = TOTALIZER 1
21 = TOTALIZER 2
22 = TOTALIZER 3
Factory setting: MASS FLOW
Advanced selection: (with the optional SW package BATCHING)
52 = BATCH NAME (“BATCH # 1” or “BEER 330”, etc.)
53 = BATCH QUANTITY (overall quantity to be batched)
54 = BATCH COUNTER (batching processes carried out)
55 = BATCH SUM (effective total batching quantity)
! Note!
The options given in the BATCHING software package always refer to the
batching selected in the function BATCH SELECTOR (“BATCH # 1”,
“BATCH # 2”, etc.). Example: If BATCH # 1 was selected in the BATCH
SELECTOR function (7200), then only the values from BATCH # 1 (batch name,
batch quantity etc.) can be displayed.
Advanced selection: (with the optional SW package CONCENTRATION)
61 = TARGET MASS FLOW
62 = % TARGET MASS FLOW
63 = TARGET VOLUME FLOW
64 = % TARGET VOLUME FLOW
65 = CORRECTED TARGET VOLUME FLOW
66 = CARRIER MASS FLOW
67 = % CARRIER MASS FLOW
68 = CARRIER VOLUME FLOW
69 = % CARRIER VOLUME FLOW
70 = CORRECTED CARRIER VOLUME FLOW
71 = % BLACK LIQUOR
72 = ° BAUME
74 = ° API
75 = ° PLATO
76 = ° BALLING
77 = ° BRIX
78 = OTHER (_ _ _ _ flexible concentration)
(continued on next page)
To Next Page
Loading...
