Device Functions Proline Promass 83 MODBUS RS485 10 Block SPECIAL FUNCTION
Endress+Hauser 161
10.3.8 Function group ELECTRODYNAMIC SENSORS
SPECIAL FUNCTION H → DENSITY FUNCTIONS HAA
→
BATCHING FUNCTION HCA
→
ADVANCED DIAGNOSTICS HEA → CONFIGURATION 740
→
ACQUISITION 741
→
MASS FLOW 742
→
DENSITY 743
→
REFERENCE DENSITY 744
→
TEMPERATURE 745
→
TUBE DAMPING 746
→
ELECTRODYNAMIC
SENSORS
747
Function description
SPECIAL FUNCTION → ADVANCED DIAGNOSTICS → ELECTRODYNAMIC SENSORS
REFERENCE VALUE
MODBUS register:
Data type:
Access:
7470
See Note
Float
read
The reference value for the electrodynamic sensors appears on the display.
Display: 5-digit floating-point number
! Note for MODBUS!
Depends on the option selected in the function SELECT REFERENCE
CONDITION:
•Option = FACTORY → MODBUS register = 6673
•Option = USER → MODBUS register = 6675
ACTUAL VALUE
MODBUS register:
Data type:
Access:
7471
6677
Float
read
The measuring values for the electrodynamic sensors appear on the display.
Display: 5-digit floating-point number
MINIMUM VALUE
MODBUS register:
Data type:
Access:
7472
6679
Float
read
The lowest value of the electrodynamic sensors since the saved values were last
reset appears on the display.
Display: 5-digit floating-point number
MAXIMUM VALUE
MODBUS register:
Data type:
Access:
7473
6681
Float
read
The highest value of the electrodynamic sensors since the saved values were last
reset appears on the display.
Display: 5-digit floating-point number
To Next Page
Loading...
