Device Functions Proline Promass 83 MODBUS RS485 5 Block USER INTERFACE
Endress+Hauser 41
5.3 Group ADDITIONAL LINE
5.3.1 Function group CONFIGURATION
USER INTERFACE C → CONTROL CAA
→
MAIN LINE CCA
→
ADDITIONAL LINE CEA → CONFIGURATION 240
Function description
USER INTERFACE → ADDITIONAL LINE → CONFIGURATION
ASSIGN
MODBUS register:
Data type:
Access:
2400
2527
Integer
read/write
For assigning a value to be displayed to the additional line (middle line in the local
display). This value is displayed during normal operation.
Options: standard
0 = OFF
1 = MASS FLOW
2 = MASS FLOW IN %
3 = VOLUME FLOW
4 = VOLUME FLOW IN %
5 = CORRECTED VOLUME FLOW
6 = CORRECTED VOLUME FLOW IN %
7 = DENSITY
8 = REFERENCE DENSITY
9 = TEMPERATURE
10 = MASS FLOW BARGRAPH IN %
11 = VOLUME FLOW BARGRAPH IN %
12 = CORRECTED VOLUME FLOW BARGRAPH IN %
15 = ACTUAL CURRENT
18 = ACTUAL FREQUENCY
20 = TOTALIZER 1
20 = TOTALIZER 2
20 = TOTALIZER 3
23 = TAG NAME
Factory setting: TOTALIZER 1
Advanced selection: with the optional SW package BATCHING
52 = BATCH NAME (“BATCH # 1” or “BEER 330”, etc.)
53 = BATCH QUANTITY (overall quantity to be batched)
54 = BATCH COUNTER (batching processes carried out)
55 = BATCH SUM (effective total batching quantity)
56 = BATCH UPWARDS (batching progress upwards)
57 = BATCH DOWNWARDS (batching progress downwards)
! Note!
The options given in the BATCHING software package always refer to the
batching selected in the function BATCH SELECTOR (“BATCH # 1”,
“BATCH # 2”, etc.). Example: If BATCH # 1 was selected in the BATCH
SELECTOR function (7200), then only the values from BATCH # 1 (batch name,
batch quantity etc.) can be displayed.
(continued on next page)
To Next Page
Loading...
