Endress+Hauser Proline Promass 83 - Diagnosis Transducer Block parameters

Device Functions Proline Promass 83 MODBUS RS485 10 Block SPECIAL FUNCTION
Endress+Hauser 131
10.2 Group BATCHING FUNCTION
10.2.1 Function group CONFIGURATION
SPECIAL FUNCTION H → DENSITY FUNCTIONS HCA
→
BATCHING FUNCTION HCA → CONFIGURATION 720
Function description
SPECIAL FUNCTION → BATCHING FUNCTION → CONFIGURATION
BATCH SELECTOR
MODBUS register:
Data type:
Access:
7200
6301
Integer
read/write
For selecting the batching specification. There are six different batching
specifications available by means of which different batchings can be defined.
Options:
0 = BATCH # 1
1 = BATCH # 2
2 = BATCH # 3
3 = BATCH # 4
4 = BATCH # 5
5 = BATCH # 6
Factory setting: BATCH #1
! Note!
• A specific name can be given to the batching process (BATCH # 1 to 6 ) in the
function BATCH NAME (7201).
• By selecting a batching specification and its related settings (explained below),
up to 6 different batchings can be preconfigured and selected as necessary.
• All the following functions in this function group, as well as the functions in the
function groups VALVE PARAMETER (722) and SUPERVISION (724) are
assigned to the batching specification selected here.
• All the settings in the following functions of this function group are valid only
for the batching specification selected in the function BATCH SELECTOR
(7200). In other words, the entry or option is assigned to the batching
specification currently selected (e.g. in the factory setting BATCH # 1).
BATCH NAME
MODBUS register:
Data type:
Access:
7201
See Note
String (8)
read/write
Use this function to assign a specific name to the batching specification.
User input: max. 8-character text, permissible: A-Z, 0-9
Factory setting: Name of batching specification (depends on selection in the
function BATCH SELECTOR (7200), e.g. “BATCH # 1”).
! Note!
Once an entry has been made (e.g. “BEER 33”), the batch name (BEER 33)
appears in the HOME position when selecting the quantity and the name of the
batching specification (e.g. “BATCH # 1”) no longer appears.
! Note for MODBUS!
The MOBBUS register depends on the option selected in the function BATCH
SELECTOR (7200):
• BATCH # 1 = MODBUS register 6302
• BATCH # 2 = MODBUS register 6306
• BATCH # 3 = MODBUS register 6310
• BATCH # 4 = MODBUS register 6314
• BATCH # 5 = MODBUS register 6318
• BATCH # 6 = MODBUS register 6322