Endress+Hauser Proline Promass 83 - Page 130

10 Block SPECIAL FUNCTION Device Functions Proline Promass 83 MODBUS RS485
130 Endress+Hauser
COEFFICIENT B2
MODBUS register:
Data type:
Access:
7038
See Note
Float
read/write
! Note!
This function does only appear if the option % MASS 3D, % VOLUME 3D or
OTHER 3D was selected in the function MODE (7021).
Coefficient B2 entry.
User input: 5-digit floating-point number
Factory setting: 0
! Note for MODBUS!
The MOBBUS register depends on the option selected in the function
CONCENTRATION SELECTOR (7022):
• CONC. # 1 = MODBUS register 2275
• CONC. # 2 = MODBUS register 2277
• CONC. # 3 = MODBUS register 2279
• CONC. # 4 = MODBUS register 2281
COEFFICIENT B3
MODBUS register:
Data type:
Access:
7039
See Note
Float
read/write
! Note!
This function does only appear if the option % MASS 3D, % VOLUME 3D or
OTHER 3D was selected in the function MODE (7021).
Coefficient B3 entry.
User input: 5-digit floating-point number
Factory setting: 0
! Note for MODBUS!
The MOBBUS register depends on the option selected in the function
CONCENTRATION SELECTOR (7022):
• CONC. # 1 = MODBUS register 2283
• CONC. # 2 = MODBUS register 2285
• CONC. # 3 = MODBUS register 2287
• CONC. # 4 = MODBUS register 2289
Function description
SPECIAL FUNCTION → DENSITY FUNCTIONS → CONFIGURATION