Endress+Hauser Proline Promass 83 - Group CONTROL; Basic Configuration

Device Functions Proline Promass 83 MODBUS RS485 5 Block USER INTERFACE
Endress+Hauser 33
5.1 Group CONTROL
5.1.1 Function group BASIC CONFIGURATION
USER INTERFACE C → CONTROL CAA → BASIC CONFIGURATION 200
Function description
USER INTERFACE → CONTROL → BASIC CONFIGURATION
LANGUAGE
MODBUS register:
Data type:
Access:
2000
2502
Integer
read/write
For selecting the language for all texts, parameters and messages shown on the
local display.
! Note!
The displayed options depend on the language group available. The language
group that is supplied with the measuring device is displayed in the LANGUAGE
GROUP (8226) function (see Page 173).
Options: (for language group WEST EU / USA)
0 = ENGLISH
1 = DEUTSCH
2 = FRANCAIS
3 = ESPANOL
4 = ITALIANO
5 = NEDERLANDS
12 = PORTUGUESE
Options: (for language group EAST EU / SCAND)
0 = ENGLISH
7 = NORSK
8 = SVENSKA
9 = SUOMI
13 = POLISH
14 = RUSSIAN
15 = CZECH
Options: (for language group ASIA)
0 = ENGLISH
10 = BAHASA INDONESIA
11 = JAPANESE (syllabary)
Options: (for language group CHINA)
0 = ENGLISH
16 = CHINESE
Factory setting: Country-dependent (Page 179)
! Note!
• If you press the O/S keys simultaneously at startup, the language defaults to
“ENGLISH”.
• You can change the language group via the configuration software FieldCare.
Please do not hesitate to contact your Endress+Hauser sales office if you have
any questions.