Endress+Hauser Proline Promass 83 - Page 129

Device Functions Proline Promass 83 MODBUS RS485 10 Block SPECIAL FUNCTION
Endress+Hauser 129
COEFFICIENT A2
MODBUS register:
Data type:
Access:
7034
See Note
Float
read/write
Coefficient A2 entry.
User input: 5-digit floating-point number
Factory setting: 0
! Note for MODBUS!
The MOBBUS register depends on the option selected in the function
CONCENTRATION SELECTOR (7022):
• CONC. # 1 = MODBUS register 2243
• CONC. # 2 = MODBUS register 2245
• CONC. # 3 = MODBUS register 2247
• CONC. # 4 = MODBUS register 2249
COEFFICIENT A3
MODBUS register:
Data type:
Access:
7035
See Note
Float
read/write
Coefficient A3 entry.
User input: 5-digit floating-point number
Factory setting: 0
! Note for MODBUS!
The MOBBUS register depends on the option selected in the function
CONCENTRATION SELECTOR (7022):
• CONC. # 1 = MODBUS register 2251
• CONC. # 2 = MODBUS register 2253
• CONC. # 3 = MODBUS register 2255
• CONC. # 4 = MODBUS register 2257
COEFFICIENT A4
MODBUS register:
Data type:
Access:
7036
See Note
Float
read/write
Coefficient A4 entry.
User input: 5-digit floating-point number
Factory setting: 0
! Note for MODBUS!
The MOBBUS register depends on the option selected in the function
CONCENTRATION SELECTOR (7022):
• CONC. # 1 = MODBUS register 2259
• CONC. # 2 = MODBUS register 2261
• CONC. # 3 = MODBUS register 2263
• CONC. # 4 = MODBUS register 2265
COEFFICIENT B1
MODBUS register:
Data type:
Access:
7037
See Note
Float
read/write
! Note!
This function does only appear if the option % MASS 3D, % VOLUME 3D or
OTHER 3D was selected in the function MODE (7021).
Coefficient B1 entry.
User input: 5-digit floating-point number
Factory setting: 0
! Note for MODBUS!
The MOBBUS register depends on the option selected in the function
CONCENTRATION SELECTOR (7022):
• CONC. # 1 = MODBUS register 2267
• CONC. # 2 = MODBUS register 2269
• CONC. # 3 = MODBUS register 2271
• CONC. # 4 = MODBUS register 2273
Function description
SPECIAL FUNCTION → DENSITY FUNCTIONS → CONFIGURATION