Endress+Hauser Proline Promass 83 - Block QUICK SETUP; QUICK SETUP COMMISSIONING

Device Functions Proline Promass 83 MODBUS RS485 3 Block MEASURED VARIABLES
Endress+Hauser 19
UNIT LENGTH
MODBUS register:
Data type:
Access:
0424
2125
Integer
read/write
For selecting the unit for displaying the length of the nominal diameter.
The unit you select here is also valid for:
• Nominal diameter of sensor (function NOMINAL DIAMETER (6804) on
Page 119)
Options:
0 = MILLIMETER
1 = INCH
Factory setting: MILLIMETER
UNIT PRESSURE
MODBUS register:
Data type:
Access:
0426
2130
Integer
read/write
For selecting the unit for displaying the pressure.
The unit you select here is also valid for:
• Specified pressure (function PRESSURE (6501) on Page 117)
Options:
0 = bara
1 = barg
2 = psia
3 = psig
Factory setting: barg
Function description
MEASURED VARIABLES → SYSTEM UNITS → ADDITIONAL CONFIGURATION