Epson RC180 - Safety Procedures and Guidelines; Safety Symbols and Conventions

Safety 1. Safety
RC180 Rev.17 3
1. Safety
Installation and transportation of robots and robotic equipment shall be performed by
qualified personnel and should conform to all national and local codes.
Please read this manual and other related manuals before installing the robot system or
before connecting cables. Keep this manual in a handy location for easy access at all
times.
Read the Safety chapter in EPSON RC+ 5.0 User’s Guide and confirm Safety-related
requirements.
2. Conventions
Important safety considerations are indicated throughout the manual by the following
symbols. Be sure to read the descriptions shown with each symbol.
WARNING
This symbol indicates that a danger of possible
serious injury or
death exists if the associated instructions are not followed
properly.
WARNING
This symbol indicates that a danger of possible harm to people
caused by electric shock exists if the associated instructions are
not followed properly.
CAUTION
This symbol indicates that a danger of possible harm to people or
physical damage to equipment and facilities
exists if the
associated instructions are not followed properly.