Epson RC180 - Backup from the Teach Pendant (Option)

Maintenance 4. Backup and Restore
128 RC180 Rev.17
4.3.2 Backup from the Teach Pendant TP1 (Option)
Backs up system files in the Controller to USB memory. (Only TP1. TP2 does not
support this function.)
(1) Insert the USB memory into the Controller.
(2) In the [Programming] screen, move the cursor to [System Backup…], and press the
<OK> key. The following screen appears.
Enter the file name.
(3) Press the <Enter> key. The following screen appears.
<OK>
When the <OK> key is pressed without specifying a folder, the backup files are
stored in a subfolder of the USB memory root folder.
(4) Press the <F2> key. The following screen appears.
Specify the folder to save the backup data.