Epson RC180 User Manual

Setup & Operation 12. Option Units
RC180 Rev.17 89
12.3.6 CC-Link
WARNING
■
Make sure that the
power is turned OFF before installing/removing any boards or
connecting/disconnecting any cables. Installing/removing any boards or
connecting/disconnecting any cables with the power ON is extremely hazardous
and may result in electric shock and/or malfu
nction of equipment.
CAUTION
■
Pay attention to the followings in order to prevent the
CC-Link connecter from
coming off.
1. Use the connectors attached to the board.
2. Insert the connectors all the way seated.
3. Fix the cables at proper positions in order not to put a load on the
connectors.
Overview of CC-Link
CC-Link is one of fieldbus networks that provide easy interconnection between control
devices (PLC, PC, sensor, actuator, etc.).
CC-Link was developed as an open communication standard to connect various field
devices (sensor, actuator, robot controller, etc.). Because of the open communication
standard, CC-Link can easily construct multi-vendor system with various devices
developed around the world.
Master Device
Motor Driver
from Company A
Motor Driver
from Company B
Intelligent I/O
from Company C
Intelligent I/O
from Company D
Photo Sensor
from Company E
Analog Device
from Company G
HMI Device
from Company F
CC-Link Network

Epson RC180 Specifications

General

Brand	Epson
Model	RC180
Category	Controller
Language	English