Epson RC180 User Manual

Maintenance 8. Trouble Shooting
RC180 Rev.17
242
EPSON RC+
No.
Message
Remedy
Note 1
Note 2
7713 Option not enabled.
7714 File not found.
10000 Command aborted by user
10001 Command timeout.
10002 Bad point file line syntax
10003 Project could not be built.
10004 Cannot initialize Spel class instance.
10005 Cannot initialize parser.
10006
Cannot initialize wbproxy.
10007 Project does not exist.
Check whether the project name
and the path are correct.
10008
No project specified.
Specify the project.
10009 Cannot open file.
Check whether the project name
and the path are correct.
10010
Cannot create file.
10011 File not found
Check whether the project name
and the path are correct.
10012
Option not enabled
10013
Cannot execute LoadPoints with Robot
Manager open.
Close the robot manager and
execute.
10014
Project cannot be locked. It is being used
by another session.
Terminate other applications.
10015
Project could not be synchronized.
10016 Drive not ready
Check whether the drive
designation is correct.
10017
Invalid IP address
Check the IP address.
10018 Invalid IP mask
Check the IP mask.
10019 Invalid IP gateway
Check the IP gateway.
10020
IP address or gateway cannot be the subnet
address
Check the IP address.
10021
IP address or gateway cannot be the
broadcast address
Check the IP address.
10022 Invalid DNS address
Check the DNS.
10023
Commands cannot be executed because
the project build is not complete.
Execute after the project build is
completed.
10024
Invalid task name.
Check the task name.
10025
Trial runtime expired.
10100
Command already in cycle.
10101
Command aborted by user.

Epson RC180 Specifications

General

Brand	Epson
Model	RC180
Category	Controller
Language	English