Epson Stylus NX510 - Page 157

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A
DISASSEMBLY/ASSEMBLY Differences in Disassembling/Reassembling SX210 series 157
Confidential
8. Unlock the connector (CN2) on the Panel Board B, and disconnect the LCD
FFC.
9. Remove the Panel Board A, B from the Panel Housing.
10. Remove the Panel FFCs (x2) from the connectors (CN1, CN3) on the Panel
Board B, and the connector (CN1) on the Panel Board A.
Figure 4-150. Removing the Panel Board
11. Remove the screw (x1) that secures the LCD Unit, and remove it from the
Panel Housing.
Figure 4-151. Removing the LCD Unit
12. Remove each button from the Panel Housing.
Figure 4-152. Removing the Switch Button
Panel Board B
CN2
LCD FFC
Panel FFC
Panel FFC
Panel Board A
Panel Housing
CN1
CN1
CN3
Positioning Hole/Pin
Locked
Unlocked
Lock
C.B.P. 3x8, F/Zn-3C (4±1kgfcm)
Positioning Hole and PinRib
Panel Housing
LCD Unit
Start SW button
Size SW button
Mode SW button
Power SW button
Stop SW button
Zoom SW button
+/− SW button
Arrow SW button