Epson Stylus Photo R2000 Series User Manual

Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series Revision I
Stylus Photo R2000/R2000s Features 183
Table 8-14. Indicators (LEDs) Function
Printer Status
Indicators (LEDs)
Priority
*
1
Power Paper Ink
NW
sheet
Wi-FI
Power OFF Flashes at
high speed
OFF OFF -- --
1
Fatal Error OFF Flashes at
high speed
Flashes at
high speed
-- --
2
Maintenance request OFF Flashes
alternately
1
Flashes
alter nately
2
-- --
3
CDR guide error -- Flashes 2 Flashes at
high speed
-- --
4
Paper path error -- Flashes -- -- --
5
Paper (CDR) jam -- Flashes -- -- --
Cover open error -- Flashes -- -- --
Multi-feed error -- ON -- -- --
6
No paper error -- ON -- -- --
CDR tray error -- ON -- -- --
During Ink scrambling sequence Flashes 3 -- -- -- --
7
Ink cartridge replacement is in
progress
Flashes -- -- -- --
8
Ink sequence is in progress Flashes -- -- -- --
9
CSIC error -- -- ON *
2
-- --
10
No ink cartridge or ink-out error -- -- ON *
2
-- --
Ink Color error -- -- Flashes at
high speed
*
2
-- --
11
Data processing / Printing from
camera
Flashes -- -- -- --
12*
3
Access point setting error
(Security key exchange)
-- -- -- -- Flashes at
high speed
Access point setting error (General) -- -- -- -- Flashes
Access point setting error
(Registration)
-- -- -- -- Flashes
Access point setting error
(PINCODE authentication)
-- -- -- -- Flashes
Success Wireless LAN setting -- -- -- -- ON *
4
Cannot set Wireless LAN -- -- -- -- Flashes
During push-button setting -- -- -- Flashes
alternately
2
Flashes
alternately
1
During PINCODE setting -- -- -- Flashes
simultaneo
usly
Flashes
simultaneo
usly
During receiving data Flashes -- -- Flashes --
Network initialization start
(LED ON)
-- -- -- ON ON
Network initialization start
(LED OFF)
-- -- -- OFF OFF
State of initialization start -- -- -- Flashes
alternately
2
Flashes
alternately
1
Non connection -- -- -- OFF --
During Wireless LAN connection
(having IP)
-- -- -- ON --
During Wired LAN connection
(having IP)
-- -- -- OFF ON
Non support device connection -- Flashes2 Flashes3
13
non compliant Hub -- Flashes 4 Flashes
Ink low -- -- Flashes*
2
14
During camera connection
(Head rubbing reduction ON)
Flashes 4 -- --
15
During camera connection
(Head rubbing reduction OFF)
Flashes 2 -- --
During Power ON sequence Flashes -- -- 16
Table 8-14. Indicators (LEDs) Function
Printer Status
Indicators (LEDs)
Priority
*
1
Power Paper Ink
NW
sheet
Wi-FI
Note *1: When two or more errors occur at the same time, the one with higher priority will be indicated.
*2: The cartridge LED corresponding to each ink cartridge lights.
*3: NW sheet LED and Wi-Fi LED don't depend on the priority of other LEDs.
*4: After the setting succeeds, LED is turned on for 5 minutes, and turned off.
(Conformed to Display specification of WPS formula)
Note : -- : No change
Flash: Repeats turning On and Off every 1.25 seconds.
Flash 2: Repeats On for 0.5 seconds, Off for 0.5 seconds,
On for 0.5 seconds, and Off for 1.0 second.
Flash 3: Repeats Off for 0.5 seconds, On for 0.5 seconds,
Off for 0.5 seconds, and On for 1.0 second.
Flash 4: Repeats On for 2.0 seconds and Off for 0.5 seconds.
Flash at high speed: Repeats turning On and Off every 0.5 seconds.
Flashes alternately 1: Same as the “Flash”
Flashes alternately 2: Repeats turning Off and On every 1.25 seconds.

Epson Stylus Photo R2000 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 optimized dpi
Number of Ink Colors	8
Borderless Printing	Yes
Operating Systems	Windows, Mac OS
Ink Type	UltraChrome Hi-Gloss 2
Ink Colors	Cyan, Magenta, Yellow, Red, Orange, Matte Black, Photo Black, Gloss Optimizer
Ink Droplet Size	1.5 picoliters
Connectivity	USB, Ethernet, Wi-Fi
Media Sizes Supported	4" x 6", 5" x 7", 8" x 10", 11" x 14", 13" x 19"
Media Types Supported	Plain paper, photo paper, fine art paper, canvas
Interface	USB, Ethernet