Epson TM-P20II Reference Guide

100
"Remote Port"
Enter up to 60 characters.
Numbers, commas, spaces, and empty strings can be input.
Enter up to 10 numbers, separated by commas. The range
is 1-65535.
- If "Enable this Group Policy" is
enable , "Method of Choosing
Port" is "Port Number" and
"Transport Protocol" is "TCP" or
"UDP", it is possible to set this
item.
"IKE Version"
Use the radio buttons to choose "IKEv1" / "IKEv2"..
- If "Enable this Group Policy" is
enabled and "Access Control"
is "IPsec", it is possible to
configure this item.
"Authentication Method"
-Use the drop-down list to make a choice.
"Pre-Shared Key" / "Certificate"
This item is displayed when
"IKE Version" is "IKEv1".
This item is enabled when
"Enable this Group Policy" is
enable and "Access Control" is
"IPsec".
"Pre-Shared Key"
- Enter the passphrase.
Usable string: ASCII code (0x20-0x7E)
Max of 127 characters.
This item is displayed when
"IKE Version" is "IKEv2".
This item is enabled when
"Enable this Group Policy" is
enable, "Access Control" is
"IPsec" and "Authentication
Method" of "Local" is
"Pre-Shared Key".
"Confirm Pre-Shared Key"
- Same as "Pre-Shared Key".
- Same as "Pre-Shared Key".
"Local"
Title
This item is displayed when
"IKE Version" is "IKEv2".
"Authentication Method"
-Use the drop-down list to make a choice.
"Pre-Shared Key" / "Certificate"
This item is displayed when
"IKE Version" is "IKEv2".
This item is enabled when
"Enable this Group Policy" is
enable and "Access Control" is
"IPsec".
"ID Type"
Use the drop-down list to make a choice.
"Distinguished Name" / "IP Address" / "FQDN" / "Email
Address" / "Key ID"
This item is displayed when
"IKE Version" is "IKEv2".
This item is enabled when
"Enable this Group Policy" is
enable, "Access Control" is
"IPsec" and "Authentication
Method" of "Local" is
"Pre-Shared Key".
"ID"
The values that can be entered depends on the selection
for "ID Type". [@][#][=] cannot be used as the first character,
regardless of the type selected.
"Distinguished Name":ASCII, 1-255 characters. Must use [=].
"IP Address":IPv4, IPv6
"FQDN": ASCII(alphanumeric, dot, hyphen), 1-255
characters
"Email Address": ASCII, 1-255 characters. Must use [@] and
[=] is not usable.
"Key ID": ASCII, 1-255 characters
This item is displayed when
"IKE Version" is "IKEv2".
This item is enabled when
"Enable this Group Policy" is
enable, "Access Control" is
"IPsec" and "Authentication
Method" of "Remote" is
"Pre-Shared Key".
"Pre-Shared Key"
-Enter the passphrase.
Usable string: ASCII code (0x20-0x7E)
Max of 127 characters.
This item is displayed when
"IKE Version" is "IKEv2".
This item is enabled when
"Enable this Group Policy" is
enable, "Access Control" is
"IPsec" and "Authentication
Method" of "Remote" is
"Pre-Shared Key".
"Confirm Pre-Shared Key"
- Same as "Pre-Shared Key".
- Same as "Pre-Shared Key".
"Remote"
Title
This item is displayed when
"IKE Version" is "IKEv2".
"Authentication Method"
-Use the drop-down list to make a choice.
"Pre-Shared Key" / "Certificate"
This item is displayed when
"IKE Version" is "IKEv2".
This item is enabled when
"Enable this Group Policy" is
enable and "Access Control" is
"IPsec".

Epson TM-P20II Specifications

General

Brand	Epson
Model	TM-P20II
Category	Printer
Language	English