99
-Enter up to 43 characters.
You can enter in the IPv4 and IPv6 formats
You can enter the empty.
It is possible to use the prefix.
You can not enter 255.255.255.255 and 0.0.0.0.
- If "Enable this Group Policy" is
enabled, this item can be
configured.
"Method of Choosing Port"
-Use the drop-down list to make a choice.
"Service Name" / "Port Number"
- If "Enable this Group Policy" is
enable, it is possible to set this
item.
From 1 to 10 of the following can be selected for "Service
Name".
However, if "Any" is selected, no other item can be
selected.
"Any "/
"ENPC" /
"SNMP"/
"LPR"/
"RAW (Port9100)" /
"IPP/IPPS"/
"WSD"/
"WS-Discovery"/
"Network Scan"/
"Network Push Scan"/
"Network Push Scan Discovery"/
"CIFS (Local)"/
"CIFS (Remote)"/
"NetBIOS Name Service (Local)"/
"NetBIOS Datagram Service (Local)"/
"NetBIOS Session Service (Local)"/
"NetBIOS Name Service (Remote)"/
"NetBIOS Datagram Service (Remote)"/
"NetBIOS Session Service (Remote)"/
"HTTP (Local)"/
"HTTPS (Local)"/
"HTTP (Remote)"/
"HTTPS (Remote)"
- If "Enable this Group Policy" is
enabled and "Method of
Choosing PORT" is "Service
Name", it is possible to
configure this item.
If the printer has these
features, they can be selected.
-LPR function
"LPR"
- RAW (Port9100)function
"RAW (Port9100)"
- IPP function
"IPP/IPPS"
WSD Scan
"WSD"/
"WS-Discovery"
-Scan function
"Network Scan"
- Push Scan Function
"Network Push Scan"/
"Network Push Scan
Discovery"
-ScanToFolder
"FTP Data (Remote)"/
"FTP Control (Remote)"/
"CIFS (Remote)"/
"NetBIOS Name Service
(Remote)"/
"NetBIOS Datagram Service
(Remote)"/
"NetBIOS Session Service
(Remote)"/
-File Sharing
"CIFS (Local)"/
"NetBIOS Name Service
(Local)"/
"NetBIOS Datagram Service
(Local)"/
"NetBIOS Session Service
(Local)"/
-Use the drop-down list to make a choice.
"Any Protocol" / "TCP" / "UDP" / "ICMPv4"
- If "Enable this Group Policy" is
enable and "Method of
Choosing Port" is "Port
Number", it is possible to set
Enter up to 60 characters.
Numbers, commas, spaces, and empty strings can be input.
Enter up to 10 numbers, separated by commas. The range
is 1-65535.
- If "Enable this Group Policy" is
enabled, "Method of Choosing
Port" is "Port Number", and
"Transport Protocol" is "TCP" or
"UDP", it is possible to