102

Use the drop-down list to choose from the following.
"DH Group 1" / "DH Group 2" / "DH Group5" / "DH
Group14" / "DH Group15" / "DH Group16" / "DH Group17" /
"DH Group18" / "DH Group19" / "DH Group20" / "DH
Group21" / "DH Group22" / "DH Group23" / "DH Group24" /
"DH Group25" / "DH Group26" / "Any"
This item is displayed when
"IKE Version" is "IKEv1".
This item is enabled when
"Enable this Group Policy" is
enable, "Access Control" is
Use the drop-down list to choose from the following.
"DH Group 1" / "DH Group 2" / "DH Group5" / "DH
Group14" / "DH Group15" / "DH Group16" / "DH Group17" /
"DH Group18" / "DH Group19" / "DH Group20" / "DH
Group21" / "DH Group22" / "DH Group23" / "DH Group24" /
"DH Group25" / "DH Group26" / "DH Group27" / "DH
Group28" / "DH Group29" / "DH Group30" / "Any"
This item is displayed when
"IKE Version" is "IKEv2".
This item is enabled when
"Enable this Group Policy" is
enable, "Access Control" is
"IPsec".
Title strings. "Encryption" and "Authentication" are
contained.
Use the drop-down list to choose from the following.
"AES-CBC-128" / "AES-CBC-192" / "AES-CBC-256" /
"AES-GCM-128" / "AES-GCM-192" / "AES-GCM-256" / "3DES"
/ "Any"
This item is enabled when
"Enable this Group Policy" is
enabled, "Access Control" is
"IPsec", and "Security Protocol"
is "ESP".
Use the drop-down list to choose from the following.
"SHA-1" / "SHA-256" / "SHA-384" / "SHA-512" / "MD5" /
"Any"
This item is enabled when
"Enable this Group Policy" is
enabled, "Access Control" is
"IPsec", and "Security Protocol"
is "ESP". This item is disabled
when "Encryption" for "ESP" is
"AES-GCM-128",
"AES-GCM-192", or
Title strings. "Authentication" is contained.
Use the drop-down list to choose from the following..
Support algorithms refer to the Network Functional
Specifications.
"SHA-1" / "SHA-256" / "SHA-384" / "SHA-512" / "MD5" /
"Any"
This item is enabled when
"Enable this Group Policy" is
enabled, "Access Control" is
"IPsec", and "Security Protocol"
is "ESP".
To Next Page
Loading...
