Epson TM-P20II Reference Guide

69
"Printer Name"
Use the check box to choose whether or not to allow
RAW port printing
Only RAW(Port9100) support
printer.
"Location"
Use the edit box to set the timeout for RAW port
printing
(0 ~ 3600 seconds)
Only printers that support RAW
(Port9100)
Can be entered, when "Allow
RAW (Port9100) Printing" is
checked.
"SNMPv1/v2c Settings"
Title
Only SNMPv3 support printer.
"Enable SNMPv1/v2c"
You can choose whether or not to enable SNMPv1/v2c
using the check box.
This item is displayed when the
device supports SNMPv3
function and not support
SNMPv1/v2c Individual Setting.
"Access Authority"
Use the drop-down list to choose the following
options.
"Read Only" / "Read/Write"
Only SNMPv3 support printer.
Can be entered, when "Enable
SNMPv1/v2c" is checked.
"Community Name(Read
Only)"
Use the text box to set the Community Name (Read
Only).
0 ~ 32 characters in ASCII
Only SNMPv3 support printer.
Can be entered, when "Enable
SNMPv1/v2c" is checked.
"Community
Name(Read/Write)"
Use the text box to set the Community Name
(Read/Write).
0 ~ 32 characters in ASCII
Only SNMPv3 support printer.
Can be entered, when "Enable
SNMPv1/v2c" is checked.
"IP Trap1"
Title of field which contains below 4 items.
This item is displayed on SIDM.
"Enable IP Trap 1"
User can choose enable or disable with the check box.
This item is displayed on SIDM.
"Address"
User can set IPv4 address with textbox.
This item is displayed on SIDM.
"Community Name"
User can set strings with the textbox.
0 ~ 32 characters in ASCII
This item is displayed on SIDM.
"Port Number"
User can set 0 ~ 65535 with the textbox.
This item is displayed on SIDM.
"IP Trap2"
Title of field which contains below 4 items.
This item is displayed on SIDM.
"Enable IP Trap 2"
User can choose enable or disable with the check box.
This item is displayed on SIDM.
"Address"
User can set IPv4 address with textbox.
This item is displayed on SIDM.
"Community Name"
User can set strings with the textbox.
0 ~ 32 characters in ASCII
This item is displayed on SIDM.
"Port Number"
User can set 0 ~ 65535 with the textbox.
This item is displayed on SIDM.
"IP Trap3"
Title of field which contains below 4 items.
This item is displayed on SIDM.
"Enable IP Trap 3"
User can choose enable or disable with the check box.
This item is displayed on SIDM.
"Address"
User can set IPv4 address with textbox.
This item is displayed on SIDM.
"Community Name"
User can set strings with the textbox.
0 ~ 32 characters in ASCII
This item is displayed on SIDM.
"Port Number"
User can set 0 ~ 65535 with the textbox.
This item is displayed on SIDM.
"IP Trap4"
Title of field which contains below 4 items.
This item is displayed on SIDM.
"Enable IP Trap 4"
User can choose enable or disable with the check box.
This item is displayed on SIDM.
"Address"
User can set IPv4 address with textbox.
This item is displayed on SIDM.
"Community Name"
User can set strings with the textbox.
0 ~ 32 characters in ASCII
This item is displayed on SIDM.
"Port Number"
User can set 0 ~ 65535 with the textbox.
This item is displayed on SIDM.
"SNMPv3 Settings"
Title
Only SNMPv3 support printer.
"Enable SNMPv3"
Use the check box to choose whether or not to enable
SNMPv3.
Only printers that support
SNMPv3
"User Name"
Use the text box to set the User Name.
1 ~ 32 bytes in UTF-8
Only printers that support
SNMPv3
Can be entered, when "Enable
SNMPv3" is checked.
"Authentication Settings"
Title
Only SNMPv3 support printer.
"Algorithm"
Use the drop-down list to choose the following
options.
"MD5" / "SHA-1"
Only SNMPv3 support printer.
Can be entered, when "Enable
SNMPv3" is checked.
"Password"
Use the text box to set the Password.
8 ~ 32 bytes, in ASCII and masked.
If 10 asterisks (*) are entered when the password field
is blank, the setting fails.
Only SNMPv3 support printer.
Can be entered, when "Enable
SNMPv3" is checked.
"Confirm Password"
Same as Password.
Same as Password.
"Encryption Settings"
Title
Only SNMPv3 support printer.
"Algorithm"
Use the drop-down list to choose the following
options.
"DES" / "AES-128"
Only SNMPv3 support printer.
Can be entered, when "Enable
SNMPv3" is checked.
"Password"
Use the text box to set the Password.
8 ~ 32 bytes, in ASCII and masked.
If 10 asterisks (*) are entered when the password field
is blank, the setting fails.
Only SNMPv3 support printer.
Can be entered, when "Enable
SNMPv3" is checked.

Epson TM-P20II Specifications

General

Brand	Epson
Model	TM-P20II
Category	Printer
Language	English