Receive Mode:
Select the receive mode.
DRD:
If you have subscribed to a distinctive ring service from your telephone company, select the ring
pattern to be used for incoming faxes. e distinctive ring service, oered by many telephone
companies (the service name diers by company), allows you to have several phone numbers on one
phone line. Each number is assigned dierent ring pattern. You can use one number for voice calls and
another for fax calls. Depending on the region, this option may be On or O.
Rings to Answer:
Select the number of rings that must occur before the printer automatically receives a fax.
Remote Receive:
When you answer an incoming fax call on a phone connected to the printer, you can start receiving the
fax by entering the code using the phone.
Rejection Fax:
Select options to reject junk faxes.
Receiving Paper Size:
Select the maximum paper size for faxes that the printer can receive.
Send Settings
Select the menus on the control panel as described below.
Settings > General Settings > Fax Settings > Send Settings
Auto Rotation:
An A4 size original placed in the ADF or on the scanner glass with its long edge facing to the le is sent
as an A3 size fax. Enable this to rotate the scanned image to send it at A4 size.
Quick memory send:
e quick memory send feature starts sending the fax when the printer nishes scanning the rst page.
If you do not enable this feature, the printer starts sending aer saving all of the scanned images to
memory. By using this feature you can reduce the overall operation time as scanning and sending are
performed in parallel.
Batch Send:
When there are multiple faxes waiting to be sent to the same recipient, this groups them together to
send them at once. Up to
ve
documents (up to 100 pages in total) can be sent at one time.
is
helps
you save on connection fees by reducing the number of transmission times.
Auto Redial Count:
Select the number of times that the printer automatically redials if the fax number is busy or a problem
occurs.
User's Guide
Faxing
105
To Next Page
Loading...
Need help?
General
