Epson WF-C20590 Series - Scanning to a Computer (WSD); Setting Up a WSD Port

ADF Continuous Scan:
You can place a large number of originals in the ADF in batches, and scan them as a single scanning
job.
Scanning to a Computer (WSD)
Note:
❏  i s f e atur e i s o n ly av a i l a bl e f o r c o m put e rs r un n ing Wind ow s 1 0 / Window s 8 . 1 / Wi n d o w s 8 / Wind ows 7 / Wi n d o w s Vi s t a .
❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature.
1. Place the originals.
Note:
If you want to scan multiple originals, place all of the originals on the ADF.
2. Tap Scan on the home screen.
3. Tap Computer (WSD).
4. Select a computer.
5. Tap
x.
Related Information
& “Placing Originals” on page 32
Setting Up a WSD Port
is section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e following is necessary to set up a WSD port.
❏ e printer and the computer are connected to the network.
❏ e printer driver is installed on the computer.
1. Turn the printer on.
2. Click start, and then click Network on the computer.
3.
Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
User's Guide
Scanning
124