Fax Settings
Select the menus on the control panel as described below.
Fax > Fax Settings
Quick Operation Button:
Displays up to four frequently used items such as Transmission Log and Original Type.
ese
allow
you to quickly and easily make settings.
You must assign items in advance in Settings > General Settings > Fax Settings > User Settings >
Quick Operation Button
❏ ere are four buttons available as the Quick Operation Button.
Scan Settings:
❏ Original Size (Glass)
Select the size and orientation of the original you placed on the scanner glass.
❏ Original Type
Select the type of your original.
❏ Color Mode
Select whether to scan in color or in monochrome.
❏ Resolution
Select the resolution of the outgoing fax. If you select a higher resolution, the data size becomes
larger and it takes time to send the fax.
❏ Density
Sets the density of the outgoing fax. + makes the density darker, and - makes it lighter.
❏ Remove Background
Select the darkness of the background. Tap + to lighten (whiten) the background and tap - to darken
(blacken) it.
If you select Auto, the background colors of the originals are detected, and they are removed or
lightened automatically. It is not applied correctly if the background color is too dark or not
detected.
❏ Sharpness
Enhances or defocuses the outline of the image. + enhances the sharpness, and - defocuses the
sharpness.
❏ ADF 2-Sided
Scans both sides of originals placed in the ADF and sends a monochrome fax.
❏ ADF Continuous Scan
When sending a fax from the ADF, you cannot add originals in the ADF aer starting scanning. If
you place dierent sized originals in the ADF, all of the originals are sent at the largest size among
them. Enable this option so that the printer asks if you want to scan another page
aer
an original in
the ADF has nished scanning. en you can sort and scan your originals by size and send them as
a single fax.
User's Guide
Faxing
101
To Next Page
Loading...
Need help?
General
