Add Reception Information:
Prints reception information in the header of the received fax, even if the sender does not set the
header information. e reception information includes the received date and time, sender's ID,
reception ID (such as " #001"), and page number (such as "P1"). When Split Page Settings is enabled,
the split page number is also included.
2-Sided:
You can print multiple pages of received documents on both sides of the paper.
Print Start Timing:
Select options to start printing the received documents.
All Pages Received: Aer receiving all of the pages, printing starts from the rst page. If the Collation
Stack feature is enabled, printing starts from the last page and then the pages are arranged in the
correct order.
First Page Received: Starts printing when the rst page is received, and then prints in order as the
pages are received. If the printer cannot start printing, such as when it is printing other jobs, the printer
starts printing received pages as a batch when it is available.
Collation Stack:
Prints received documents from the last page (print in descending order) so that the printed
documents are stacked in the correct page order. When the printer is running low on memory, this
feature may not be available.
Print Suspend Time:
Saves documents received during the
specied
time period in the printer's memory without printing
them. At the time specied to restart printing, the documents are automatically printed. is feature
can be used for noise prevention at night or to prevent condential documents from being disclosed
while you are away. Before using this feature, make sure there is enough free memory. Even before the
restarting time, you can check and print the received documents individually from Job/Status.
Quiet Mode:
Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.
Report Settings
Select the menu on the control panel as described below.
Settings > General Settings > Fax Settings > Report Settings
Forwarding Report:
Prints a report
aer
forwarding a received document.
Backup Error Report:
Prints a report when a backup error occurs on forwarding the sent fax to Backup Destination. You can
set this in Fax > Fax Settings > Backup.
User's Guide
Faxing
109
To Next Page
Loading...
Need help?
General
