❏ Selecting a recipient (name, fax number and so on) from the phone book:
If the recipient is saved in the phone book, click the Phone Book tab. Select the recipient from the list and
click Add. e recipient is added to the Recipient List displayed in the upper part of the window.
Note:
If your printer's Line Type is set to PBX and the access code has been set to use # (hash) instead of entering the exact
prex
code, enter # (hash). For details, see Line Type in Basic Settings from related information link below.
5.
Specify the content of the cover sheet.
To attach a cover sheet, select one of the samples from Cover Sheet. Enter the Subject and Message, and then
click Next. Note that there is no function to create an original cover sheet or to add an original cover sheet to
the list.
If you do not want to attach a cover sheet, select No cover sheet from Cover Sheet.
Note:
❏ Click Cover Sheet Formatting if you want to change the order of the items on the cover sheet. You can select the
cover sheet size in Paper size. You can also select a cover sheet at a dierent size to the document being transmitted.
❏ Click Font if you want to change the font used for the text on the cover sheet.
❏ Click Sender Settings if you want to change the sender information.
❏ Click Detailed Preview if you want to check the cover sheet with the subject and the message you entered.
6. Check the transmission content and click Send.
Make sure the name and fax number of the recipient are correct before transmitting. Click Preview to preview
the cover sheet and document to transmit.
Once transmission starts, a window displaying the transmission status appears.
Note:
❏ To stop transmitting, select the data, and click Cancel
. You can also cancel using the printer's control panel.
❏ If an error occurs during transmission, the Communication error window appears. Check the error information
and retransmit.
❏
e
Fax Status Monitor screen (the screen mentioned above where you can check the transmission status) is not
displayed if Display Fax Status Monitor During Transmission is not selected in the Optional Settings screen of the
Fax Utility main screen.
Related Information
& “Basic Settings” on page 104
Sending Documents Created Using an Application (Mac OS)
By selecting a fax-capable printer from the Print menu of a commercially available application, you can send data
such as documents, drawings, and tables, you have created.
Note:
e following explanation uses Text Edit, a standard Mac OS application as an example.
1. Create the document you want to send by fax in an application.
2. Click Print from the File menu.
e
application’s Print window is displayed.
User's Guide
Faxing
87
To Next Page
Loading...
Need help?
General
