Epson WF-C20590 Series - Polling Receive

2. Tap General Settings > Fax Settings > Basic Settings > Remote Receive.
3. Aer enabling Remote Receive, enter a two digit code (0 to 9, *, and # can be entered) in the Start Code eld.
4.
Tap OK, and then tap OK again.
Using Remote Receive
1. When the telephone rings, pick up the handset.
2. When you hear a fax tone, enter the start code using the telephone.
3.
Aer conrming
that the printer has started receiving the fax, hang up the handset.
Receiving Faxes by Polling (Polling Receive)
You can receive a fax stored on another fax machine by dialing the fax number. Use this feature to receive a
document from a fax information service. However, if the fax information service has an audio guidance feature
that you need to follow to receive a document, you cannot use this feature.
Note:
To receive a document from a fax information service that uses audio guidance, just dial the fax number using the On Hook
feature or the connected telephone, and operate the phone and the printer following the audio guidance.
1. Tap Fax on the home screen.
2.
Tap Menu.
3.
Tap the Polling Receive box to set this to On.
4. Tap Close.
5. Enter the fax number.
Note:
When Direct Dialing Restrictions in Security Settings is enabled, you can only select fax recipients from the contact
list and the sent fax history. You cannot manually enter a fax number.
6.
Tap
x .
Related Information
& “Sending Faxes Aer Conrming the Recipient's Status” on page 64
&
“Sending Faxes Dialing from the External Phone Device” on page 63
Receiving Faxes from a Board with a Subaddress (SEP) and Password (PWD)
(Polling Receive)
You can receive faxes from a board stored on another fax machine with a subaddress (SEP) and password (PWD)
feature. To use this feature, you need to register the contact with the subaddress (SEP) and password (PWD) in the
contact list in advance.
User's Guide
Faxing
72