User Settings
Select the menus on the control panel as described below.
Settings > General Settings > Fax Settings > User Settings
Initial tab
Select the tab you want to display rst each time you tap Fax from the fax top screen.
Quick Operation Button
You can register up to four items displayed in Fax > Frequent and Fax Settings. is is useful for
settings that you use oen.
Basic Settings
Select the menus on the control panel as described below.
Settings > General Settings > Fax Settings > Basic Settings
Fax Speed:
Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a communication
error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP
(VoIP) phone service.
ECM:
Automatically corrects errors in the fax transmission (Error Correction Mode), mostly caused by
telephone line noise. If this is disabled, you cannot send or receive documents in color.
Dial Tone Detection:
Detects a dial tone before starting to dial. If the printer is connected to a PBX (Private Branch
Exchange) or digital phone line, the printer may fail to start dialing. In this situation, change the Line
Type setting to PBX. If this does not work, disable this feature. However, disabling this feature may
drop the rst digit of a fax number and send the fax to the wrong number.
Dial Mode:
Select the type of phone system to which you have connected the printer. When set to Pulse, you can
temporarily switch the dialing mode from pulse to tone by pressing
("T" is entered) while entering
numbers on the fax top screen. Depending on the region, this setting may not be displayed.
Line Type:
Select the line type to which you have connected the printer. When using the printer in an environment
that uses extensions and requires an external access code, such as 0 and 9, to get an outside line, select
PBX and register the access code. Once you have registered the access code, enter # (hash) instead of
the access code when sending a fax to an outside fax number. For an environment that uses a DSL
modem or terminal adapter, setting to PBX is also recommended.
Header:
Enter your sender name and fax number. ese appear as a header on outgoing faxes. You can enter up
to 40 characters for your name, and up to 20 digits for your fax number.
User's Guide
Faxing
104
To Next Page
Loading...
Need help?
General
