Epson WF-C5790 - Page 566

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A
Adjustment Adjustment and Inspection Details 566
Confidential
HEAD ID INPUT
1. Start the Adjustment Program, and select “Head ID Input”.
2. Press the Auto input button, and then enter the head ID.
Figure 7-11. Head ID Input screen
INITIALIZE PF DETERIORATION OFFSET
1. Start the Adjustment Program, and select “Initialize PF deterioration offset”.
2. Press the Initialization button, and initialize the concerned counter.
Figure 7-12. Initialize PF deterioration offset screen
C H E C K
P O I N T
 If you press the Check button, you can check the head ID that
has been currently entered.
By comparing the values before input and after input, it can be
checked if the head ID has been written correctly.
 If Head ID Input cannot be performed, head failure occurs.
Therefore, replace the Printhead with a new part.