• Rotating a shape around the boxing center
Modifying each dimension or half-dimension separately
Select the icon representing the part of the shape which you wish to reduce or increase.
A red rectangle is displayed around the icon.
Use the or buttons to decrease or increase the corresponding value and view the modification
in real time.
You can also press for a few seconds on the corresponding value to display the numeric keypad:
enter a new value and press to confirm.
The shape is modified.
The original shape is displayed in light red.
Example of an A-dimension reduction: Example of a half B-dimension reduction:
Modify the overall size of the shape
Press to select modification by scaling.
A red rectangle is displayed around the icon.
Use the or buttons to decrease or increase the shape and view the modification in real time.
You can also press for a few seconds on the corresponding value to display the numeric keypad:
enter a new value and press to confirm.
The shape is modified.
The original shape is displayed in light red.
To Next Page
Loading...
Need help?
General
