28 Sensor+ CEM+ User/Config Manual
Search
The Search pages (search appears multiple times within the Sensor+ Connect webpages) allow you to
find dimmers based on multiple search criteria. For example, you can search for all of the D20AF
modules in rack 3 with a specific dimming curve.
The results of that search are presented on a dimmer status page (the next tab).
Using the Configure Dimmers webpage within the Search function provides an easy way to set one
property or properties on the top of the page and have it apply those settings to every found dimmer
in the group.
These are the same dimmer properties as explained above. See
Configure Dimmers
on
page 25
.
You can also use the Configure Dimmers tab to modify the properties of all the found dimmers at
once. (See below.)
1) To clear a specific error,
click in the check box
then...
2) Click the Clear
Error(s) button.
Click the Clear All Error(s) button to clear
errors regardless of the check boxes.
...or...
Selected search criteria
(from the example above)
To Next Page
Loading...
