ETC sensor+ CEM+ - Configuration Changes

82 Sensor+ CEM+ User/Config Manual
Group Menu
Setup Preset
[Remote Record]
Remote Record
[Off]
Record Type
[XXXXXXXXXX]
Preset Recorded
Overwrite [yes/no]
Preset >ppp<
Deactivated
Preset >5< Cleared
Preset ppp Active
[namenamenamena]
Rack: xx/xx OK
[Group]
Set Priority 3
>10<
Name Preset ppp
[NNNNNNNNNNNNNN]
Record Preset
Preset Number [ppp]
Name Preset
Preset Number [ppp]
Fade In Time
[ 0]: [ 02]
Setup Preset
[Edit Room Name]
Name Room >#<
[ROOM ONE xxxxxx]
Setup Preset
[Edit Name]
if existing
Setup Preset
[Max Active Presets]
Set Active Presets
[a] Active Presets
Setup Group >xx<
[Presets]
Preset
[Activate Preset]
Select Preset >ppp<
[namenamenamena]
Preset
[Deactivate presets]
Preset
[Clear presets]
Clear preset [1]
Preset >5<
Setup Preset
[Record Preset]
Select Preset >ppp<
[namenamenamena]
Select Room >g<
[namenamenamena]
Set Priority >ppp<
[10]
Setup Preset
[Edit Priority]
Select Preset >ppp<
[namenamenamena]
Setup Preset
[Edit Fade Times]
Select Preset >ppp<
[namenamenamena]
Fade InTime
[00:00]
Assign to Room [1]
[A-G nnnnnnnnnnnnnn]
Setup Preset
Preset ppp Recorded
Fade Out Time
[ 0]: [ 02]
Setup Preset
[Power Up Behavior]
Power Up Behavior
[Normal]
Setup Preset
[Station Master]
Station Master
[On]
Assign Room/Preset
Room >2< Preset [127]
Assign Room/Preset
Room >3< Preset [126]
Assign Room/Preset
Room >4< Preset [125]
Assign Room/Preset
Room >1< Preset [128]
Setup Preset
[DMX Loss Presets]
If
room
2
yes yes yes
No
No No
Select Input
[DMXA]
If
room
3
If
room
4
Fade Out Time
[00:00]
Name Room
Room Number [1]
No
Yes
Overwrite
Yes