4. Click the OK button.
5.2.11 Set up Live View Sound on Event
1. Startup > NVR > Remote Live Viewer.
2. Click the General Setting button.
3. Click the Sound tab.
4. Check the Enable playing sound on event option.
5. Select sound file, default sound or user defined sound (.wav).
6. Click the OK button.
The function only activates on event, which means you have to setup camera motion,
camera I/O and I/O Box I/O as an event. Refer to Event & Action Management to
do the setting.
5.2.12 Set up Remote Live Viewer
1. Startup > NVR > Remote Live Viewer.
2. Click the unit you wish to access in your remote server list.
3. Click the LOG IN button to access your unit.
4. Select a camera(s) from the camera list on the right and then drag it to
where you wish the image to be displayed.
To Next Page
Loading...
