EverFocus NVR - Recording & Event Setup

22
If users enable the lens while lens is not installed correctly or not even installed, a
warning message will pop up as a notification if users are trying to operate lens on
liveview page.
2.1.6 Set up 2nd Stream
The stream profile is designed for mobile clients and lower-fps live stream
display. Without stream profile integration, users cannot watch live video on
mobile clients nor select a lower fps stream for Live View. Further, for
performance considerations, we fix the resolution and frame rate for each
brand/series. You can refer to appendix for a supporting list.
1. Open Internet Explorer and log into the unit.
2. Click Settings / IP Camera / Camera Parameters.
3. Click the 2nd Stream Settings tab.
 Stream Profile: The default status is Disable. If you want mobile client
user to access to this camera, you can select Enable, and click Save
button in the middle of the page.
 Low Profile: The stream profile, under 300kbps, is designed for mobile
client single-view.
 Minimum Profile: The stream profile, under 100 kbps, is designed for
mobile client multi-view.
2.1.7 View Camera Status
1. Open Internet Explorer and log into the unit.
2. Click Settings / IP Camera / Camera Status.