EverFocus NVR - Network Setup

43
the next file. If the connection is lost, the system would wait for the connection, so no
file would be skipped.
2.4.2 Set up Backup Server
1. Open Internet Explorer and log in to the unit.
2. Click RAID & File System / Auto Backup Management.
3. Click the Backup Server tab.
4. Set up the FTP server and create a folder for backup files. The folder format
is “FolderName”, “FolderName/SubFolderName”, and so on.
For example: AutoBackup/NVR
5. After setting up all the information, click the Test FTP button and the
system will create a folder to FTP. Check it after testing. In this case, the
route of the tested file will be:
ftp://test.dnsalias.com/AutoBackup/NVR/test