EverFocus NVR - Page 139

138
2. Click the Remote Server Site button to set up remote server.
3. Insert the name of your unit.
4. Insert the IP address of that unit.
5. Modify the port if necessary.
6. Insert the user name.
7. Insert the password.
8. Check the Save Password option.
9. Click the Test Server button to test the connection between the local
application and the remote unit.
10. Click the Add button to add this unit into the remote server list.
11. Click the OK button.
12. Click the ▼ button next to Remote Server Site button, and select one of
servers you added.