7800 MultiFrame Manual
7812DCDA2Q-HD (-AA, –AES4) Dual Path HDTV Down-converter
Revision 1.0 Page 15
Genlock Control Tab
Selects the source of card genlock. Selects whether DA4A/GEN operates as
an input for genlock or operates as a DA output. A more detailed description
can be found in later sections of this manual.
MISC Faults Control
Tab
Controls for enabling and disabling misc card faults including genlock status
and board temperature status. More detailed descriptions can be found in
later sections of this manual.
To access the processing controls for Path 1 or Path 2, right click on the Path 1 or Path 2 icon in the
navigation tree. Each processing path has the following control tabs shown in Figure 5-3.
Figure 5-3: Processing Path
To Next Page
Loading...
