7800 MultiFrame Manual
7812DCDA2Q-HD (-AA, –AES4) Dual Path HDTV Down-converter
Revision 1.0 Page 79
9.3. VISTALINK
®
CONTROLLED PARAMETERS
Parameter Description
Video Standard Input
Selects the video input standard.
Reference Select
Sets the video or external genlock for card locking.
V Phase Offset
Sets the vertical timing of the output video with respect to the
selected reference.
H Phase Offset
Sets the horizontal timing of the output video with respect to the
selected reference.
Loss of Video Mode
Selects the action to take when the input video is missing.
Audio Delay 2
Adjusts the audio delay from the card nominal.
SRC Mode
Sets the mode of the sample rate converter.
Embedder Group 1 Enable
Enables or disables the Embedder Group 1.
Embedder Group 2 Enable
Enables or disables the Embedder Group 2.
Embedder Group 3 Enable
Enables or disables the Embedder Group 3.
Embedder Group 4 Enable
Enables or disables the Embedder Group 4.
C-Bit
Enables the user to pass C-Bit settings from audio input to audio
outputs or enables the replacement of C-Bit settings.
Source X
Routes one of the 16 input audio channels to the X input of the
selected Channel mixer.
Gain Adjust X
Sets the value of the gain from the selected source.
Invert Enable X
Inverts the phase or passes the selected audio channels.
Source Y
Routes one of the 16 input audio channels to the Y input of the
selected Channel mixer.
Gain Adjust Y
Sets the value of the gain from the selected source.
Invert Enable Y
Inverts the phase or passes the selected audio channels.
RGB Clip
Enables the RGB clipper.
Y Gain
Adjusts the value of the Y Gain.
Y Offset (Black Level)
Adjusts the DC offset value of the Y component.
Cr Gain
Adjusts the value of the Cr Gain.
Cr Offset
Adjusts the DC offset value of the Cr component.
Cb Gain
Adjusts the value of the Cb Gain.
Cb Offset
Adjusts the DC offset value of the Cb component.
Hue
Adjusts the hue of the video signal. +/- 10 degrees in 0.1 degree
increments.
R Gain
Adjusts the Gain value of the R component in the RGB Domain.
R Offset
Sets the Offset in the RGB Domain.
To Next Page
Loading...
