Evoqua DEPOLOX - Interfaces

124 WT.050.570.000.DE.IM.0714
Functions DEPOLOX
®
Pool
2.6
2.6.5 Interfaces
The following interfaces are provided for external connection of the
DEPOLOX
®
Pool.
RS232 The RS232 interface serves for the connection of :
 A laptop or PC for software update
(get the latest firmware version together with a update program and
the update instruction from the homepage www.evoqua.com)
Fitting RS232 cable: W3T164565
 A printer
For each day a log as shown in Bild 38 is printed.
Each daily log comprises a header, line diagrams and output of the
day's minimum and maximum values.
The supplied measurements and the corresponding parameters such
as the setpoint, Xp and Tn are printed in the log header. The date of the
last calibration is also documented.
The line diagrams including the measuring ranges and the current ope-
rating mode are then printed as bars. The line diagrams are logged in
intervals of one minute.
The day's minimum and maximum values are printed at the end of the
log for each measurement.
Fig. 38 Printer log
Specification of the RS232 interface for printer operation:
 Data transmission 9600 baud
 Parity even
 Length of word 8 bit