Evoqua DEPOLOX - Relay Plug-In Card; Analog Outputs Plug-In Card; Interfaces; Display and Operating Unit

90 WT.050.570.000.DE.IM.0714
Technical Data DEPOLOX
®
Pool
2.2
Relay plug-in card 1 x Direct plug connector for 8-fold relay plug-in card
Storage temperature: -20 ... +70 °C
Operating temperature: 0 ... +70 °C
8 x Controller outputs
 Switching values
5 A, 250 V AC, 1250 VA max
5 A, 220 V DC, 150 W max
 UL/CSA-rating
5 A, 1/6 HP 125, 250 V AC
5 A, 30 V DC, 30 W max
1 A, 30 V DC - 0.24 A, 125 V DC
Analog outputs plug-in
card
1 x Direct plug connector for 4-fold analog outputs card
Storage temperature: -20 ... +70 °C
Operating temperature: 0 ... +70 °C
Calibration: Pre-calibrated
4 x Outputs (freely configurable)
 Output 0 / 4 ... 20 mA
 Accuracy < 0.5 % FS
 Load max. can be switched over 1000 Ohm / 400 Ohm
 Temperature drift max. 0.2 % / 10 °C
 Load monitoring
 Electrically isolated up to 50 V to ground
Interfaces 1 x RS232 for direct printer control or for firmware update (not electri-
cally isolated)
1 x RS485 for connection to:
 ChemWeb server
 OPC Server Data Access V2.0
 CMS software 2.2
 SECO-S7
 Electrically isolated up to 50 V to ground
1 x IRDA for remote calibration with the photometer P42 i-cal (isola-
ted)
Display and
operating unit
1 x Operating panel with 9 keys
8 x Red LEDs for indication of operating conditions
1 x Green LED for indication of the power supply
1 x Graphic display
 Resolution 240 x 64 pixels
 Green background illumination