Evoqua DEPOLOX - Installation with Mounting Rail

98 WT.050.570.000.DE.IM.0714
Installation DEPOLOX
®
Pool
2.4
1. Secure the mounting rail with two screws (diameter 5 mm) and two
dowels (diameter 8 mm) to the wall.
2. Hook the electronic module onto the mounting rail so that it is flush
at the right and secure with a screw (diameter 5 mm) and a dowel
(diameter 8 mm) to the wall.
3. Hook the flow block assembly onto the mounting rail next to the
electronic module and secure with two screws (diameter 5 mm)
and two dowels (diameter 8 mm) to the wall.
D e t a i l X
S I E H E D E T A I L X
2 1 0
3 1 6
3 5 02 6 3
4 5 1 6 3
6 5
4 5
8 5
3 5 1 4 0 1 9 4
3 0 , 5 2 0 3 , 5
3 2
1 7 0
ø 5 , 5
7 0
Fig. 24
Installation with moun-
ting rail