Description DEPOLOX
®
Pool
20 WT.050.570.000.DE.IM.0714
Electronic module The electronic module serves for the visualisation and subsequent pro-
cessing of the measured data as well as process control.
Positioners or various dosing pumps can be connected to the control
outputs of the process control unit.
The following functions are possible:
Dosing of the disinfectant
Adaptation of the control parameters to the circulation
(ECONOMIC operating mode)
Correction of the pH value
Control of the activated powder carbon or UV disinfection unit
Addition of the flocculant (controlled by circulation and the pH va-
lue)
Up to four relay outputs can also be used as alarm contacts. They can
be freely configured. Multiple allocation of events is possible.
The following special functions are also integrated into the control unit:
The DIN contact
Flocculation control
DIN contact The unit contains a DIN contact. If the set hygiene parameters are met,
this information is forwarded to the swimming pool control unit:
Cl2 0.3 ... 0.6 mg/l
pH 6.5 ... 7,6
Redox > 750 mV
Cl-N < 0.2 mg/l
These limits can be freely set.
Adaption programme The adaption programme automatically determines the control para-
meters for free chlorine during commissioning.
To Next Page
Loading...
