Evoqua DEPOLOX - Fitting the Fine Filter

142 WT.050.570.000.DE.IM.0714
Installation / Commissioning DEPOLOX
®
Pool
2.7
2.7.4 Fitting the Fine Filter
NOTE
 A fine filter must only be installed when membrane sensors are em-
ployed.
Fig. 42 Filter unit
1. Release the knurled nuts (1, Fig. 42)
2. Remove the filter unit (4).
3. Place the fine filter (3) into the filter unit. Ensure that the O-ring (2)
is fitted correctly.
4. Fit the filter unit. Ensure that it is fitted in the correct position (Fig.
42).
5. Tighten the knurled nuts.
1
2
3
1
4