Evoqua DEPOLOX - Top Status Line; Centre Display Range; Bottom Status Line

DEPOLOX
®
Pool Operation
WT.050.570.000.DE.IM.0714 37
1.3
Main menu
Basic display 1 Top status line
 System name (define in display 1.6.1)
 Digital inputs activated (select function in display 1.7.5)
 Password protection activated (set in display 1.6.2)
 ECONOMIC parameter activated (select in display 1.7.5)
 Time (set in display 1.6.1)
 Peak chlorination is active (select in display 1.1.7)
Centre display range
 Mode
 Free chlorine (mg/l)
 pH value (pH)
 Redox potential (mV)
Bottom status line
 Softkey display
 Feed delay (s) (set in display 1.6.2)
e.g. after sample water stop or change of mode from manual to au-
tomatic. During this time the DI-I display and the stop message in
the display flash.
 Error message (instead of positioner feedback, temperature and
feed delay)
In the case of several error messages the display alternates.
 Positioner feedback Cl
2
(%)
 Sample water temperature (°C)
Basic display 2
(if sensor measuring mo-
dule Cl-N and/
or conductivity provided)
Top status line
See basic display 1
Centre display range
 Mode
 Free chlorine (mg/l)
 Total chlorine (mg/l) or
combined chlorine
(can be selected in display 1.4.3)
 Conductivity (mS/cm) and additionally the
concentration of the NaCl in % or g/l
(can be selected in display 1.5.4)
Bottom status line
See basic display 1
 Digital display
 Bar graph
 Digital display
 Bar graph